Discrete action automatic weighers for bulk materialsThe discrete action automatic weighers are used as a part of the proportioning complexes for material measuring and can be used in different branches of industry. In such complexes free-pouring materials witha natural angle of slope of max.60° (in some complexes up to 35°), with low humidity of max.1-5% and grain size of max.3-20 mm are proportioned. Conditions of the automatic proportioning complex operation: - ambient temperature, °С (К) +5 to +40 (278-313)
- relative air humidity, % 90 (at t=25°С)
- atmosphere pressure, kPa (mm Hg) 84-106,7 (630-800)
- vibrations within the range 10…58Hz - 0,02mm; 58…500Hz - 4,9m/s2
- power supply shall be from AC network with the following voltage, V:
control circuit 220±22 power circuit 380±38 - electric main frequency, Hz 50±1
- air supply shall be from air mains with the following pressure, MPa 0,5±0,1
Among the proportioning complexes based on the discrete action automatic weighers are: - Small-scale proportioning complexes
- Proportioning complexes for small components
- Proportioning-mixing complexes for small components
- Multi-purpose proportioning complexes
Operation principle of the discrete action automatic proportioning complexes is based on the following: - a component dose of the specified weight is weighed in accordance with the dosing cyclogram for each batch;
- the complex is controlled by means of a correspondent device which converts the analogue signal proportionate to the current weight value and incoming from the force-measuring sensor to a numerical value, continuously measures it and based on the results of measurement secures carrying-out of the set proportioning program.
|