ruseng
"Stromizmeritel" LLCHigh technologies in sphere of manufacture of glassmixture and differrent multicomponent mixtures
(930)70-679-70
Automation of technological processes
Automation of technological processes
Installation and start-up of equipment
Installation and start-up of equipment
Installation and start-up of equipment
Batch equipment
Batch equipment
Batch house design
Batch house design
Service maintenance
Service maintenance
Service maintenance
Тechnology of multicomponent mixtures preparation
Тechnology of multicomponent mixtures preparation
The companyProducts and servicesPressReference listFeedbackContacts
Main page / Products and services / Equipment for machine departments / Batch feeders / Fan batch feeder

Fan batch feeder ZSH-550V

Application of the vibrating batch feeder

Веерный загрузчик шихты ЗШ-550ВThe feeder is designed for supply of batch, glass scrap, fine and granular materials with grain size of max.20mm, density of max.2 gr/cm3, which are not inclined to adhesion when being conveyed, into glass furnaces equipped with the loading pockets, design of which secures the ambient temperature in the loading area of max.350°С.

Main technical data of batch feeder ZSH-550V
Parameters and their units
Nominal values
1. Nominal capacity, tons/day
240…420
2. Hopper capacity, m3
0,3
3. .         Power network characteristics
 
– kind of current
– voltage, V
– frequency, Hz
– consumed power, kW
           
Alternating current
380±38
50
3,65
4. Water supply characteristics
 
- pressure, MPa
- temperature, °С
- hardness, mg-eq/l
- acidity, рН
- suspended solids, mg/l
- water flow, l/min.
 
0,2…0,4
+5…+30
max. 7
max. 7
max. 50
20…26
5. Maximal angle of the frame deflection about the neutral axis, degrees
±15
6. Rotation frequency of the output shaft of the pusher drive, rotations/min.
3,3…15,8
7. Dimensions of the shaking feeder tray ПВ-10
– width, mm
– height, mm
– length, mm
– angle of inclination to the horizontal, degrees
– weight, kg
 
550
180
1330
10
177
8. Dimensions, mm
– length
– width
– height
 
2144
1980
1975
9. Масса, кг
780

Conditions of the fan feeder operation:

- ambient temperature, °С (К)……………….…from +5 to +60 (278…333)
- relative air humidity, %……….…………………...…90 (at t=25°С)
- atmosphere pressure, kPa (mm Hg),……………………..…84-106,7 (630-800)
- electric power supply parameters are indicated in the table.
 
 
 
© 2018 "Stromizmeritel" company
Site map
System
quality
management
34 A Sovnarkomovskaya Street, Nizhny Novgorod, Russia, 603086
+7 (831) 435-13-70
ip3Site created by IP3