ruseng
"Stromizmeritel" LLCHigh technologies in sphere of manufacture of glassmixture and differrent multicomponent mixtures
(930)70-679-70
Automation of technological processes
Automation of technological processes
Installation and start-up of equipment
Installation and start-up of equipment
Installation and start-up of equipment
Batch equipment
Batch equipment
Batch house design
Batch house design
Service maintenance
Service maintenance
Service maintenance
Тechnology of multicomponent mixtures preparation
Тechnology of multicomponent mixtures preparation

Crusher for less-abrasive materials

APPLICATION OF THE CRUSHER FOR LESS-ABRASIVE MATERIALS
 
The crusher is designed for chopping of less-abrasive materials, prone to caking, for example sodium carbonate, with humidity max. 3% before feeding into conveying equipment in production rooms with ambient temperature from -10° to +50°.
 
MAIN TECHNICAL DATA OF THE CRUSHER
 
Parameter
Value
Capacity, kg/hour
4000*
Size of pieces of the processed material, max., mm
250
Size of particles after chopping, mm
10….15
Rotor rotation frequency, rotations/min.
18
Size of the rotor blades, mm
280
Size of the unloading tray, mm
260х260
Type of the gear motor
С353Р 77,6 S2 B3 M2SA4
Electric power supply voltage, V
380
Consumed power, kW
0,75
Overall dimensions (l х w х h), mm
1763х476х600
Weight, max., kg
82
*-actual capacity depends on the processed material properties, chopping conditions and is specified when designing the crusher.  
 
The crusher consists of the following parts:
  • a body, manufactured of sheet material, inside of which a rotor is installed, fixed in the bearing units;
  • a comb, which is fixed on the body wall with bolts;
  • a gear motor, connected to the rotor by a pin coupling.
The output shaft and the coupling with the rotor shaft are covered by a housing. A removable cover is installed on the body wall opposite to the comb.
 
Operation principle of the crusher: Material for chopping is fed through the loading flange in the crusher body between the comb and rotor edges. During the rotation of the rotor the material is crushed between the edges of the comb and rotor and runs into the discharge hopper.

Gallery

 
 
© 2018 "Stromizmeritel" company
Site map
System
quality
management
34 A Sovnarkomovskaya Street, Nizhny Novgorod, Russia, 603086
+7 (831) 435-13-70